Use & Tips - Brandt BFC7650SW Manuel D'instruction

USE & TIPS
"COLD AREA" indicator
The sign opposite can be found in your fridge.
It clearly shows the coldest zone of your appliance, where the temperature is lower than
or equal to +4°C.
A temperature gauge in this zone allows you to check the settings of your fridge.
Adjust the thermostat
Temperature correct
ok
Warning!
If the door of the fridge is left open for too long, the temperature inside the fridge will rise. Check the
temperature gauge within 30 seconds after opening the door to make sure that the reading is correct.
Setting the refrigerator:
•
Plug on your appliance. The internal temperature is controlled by a thermostat.
There are 8 settings. 1 is warmest setting and 7 is coldest setting and 0 is off.
•
The appliance may not operate at the correct temperature if it is in a particularly
hot or if you open the door often.
NB: If a power break takes place, the appliance automatically restarts at its setting prior to the power
break.
Daily use
Your refrigerator compartment is equipped with shelves, door racks and drawers with various
logos to help you store your food in the right place.
Using the shelves
The walls of the refrigerator are equipped with a series of runners so that the
shelves can be positioned as desired.
Positioning the small door trays
The small door trays can be removed to assist cleaning. To do this,
progressively pull the door rack in the direction indicated by the arrows until you
can remove it completely. After cleaning it, replace it in the desired location.
All manuals and user guides at all-guides.com