Reversing The Door Opening Direction; General Description - Brandt TL 13700 Guide D'installation Et D'utilisation

REVERSING THE DOOR OPENING DIRECTION

It is possible to reverse the door opening
direction (left instead of right):
The appliance must always be
disconnected when you change the opening
direction.
1. Remove the fridge top: remove the 2
screw covers on the top, remove the 2
screws and slide the top forwards.
2. Tilt the appliance slightly towards the
rear and wedge it in this position.
3. Unscrew the door upper hinge screws
and remove the support and pin from the
hinge.
Note: your fridge may differ slightly from this picture.
ID plate (on back)

GENERAL DESCRIPTION

Vegetable compartment
16
4. Slightly open the door and lower it out of
its hinge.
5. Unscrew the lower pin and screw it in on
the other side. Insert the door into the pin
and close it.
6. Firmly screw in the upper hinge on the
opposite side and the door pin. Fit the
top (carry out point 1 in reverse).
Thermostat and light switch
Door shelves
Bottle rack