BEHA UNITEST M-Indicator 9062 Mode D'emploi page 15

Contents
1.0 Introduction / Scope of Supply ......................16
2.0 Transport and storage ....................................16
3.0 Safety Measures ............................................17
4.0 Operation Elements ........................................18
5.0 Determination of the
Rotary Field Direction ....................................18
6.0 Contact-free rotary field
determination ................................................19
7.0 Definition of motor connections ....................21
8.0 Magnetic field detection..................................21
9.0 Maintenance ..................................................21
9.1 Cleaning ........................................................21
9.2 Calibration Interval ........................................22
9.3 Battery replacement........................................22
10.0 Technical data ................................................23
References marked on instrument or in instruc-
tion manual:
Warning of a potential danger, comply with in-
struction manual.
Reference. Please use utmost attention.
Caution! Dangerous voltage. Danger of electrical
shock.
Continuous double or reinforced insulation com-
plies with category II IEC 536.
Conformity symbol, the instrument complies
with the valid directives. It complies with the EMV
Directive (89/336/EEC), Standards EN 50081-1
and EN 50082-1 are fulfilled. It also complies with
the Low Voltage Directive (73/23/EEC), Standard
EN 61010-1 is fulfilled.
The instruction manual contains information and
references, necessary for safe operation and
maintenance of the instrument.
Prior to using the instrument (commissioning /
assembly) the user is kindly requested to tho-
roughly read the instruction manual and comply
with it in all sections.
Failure to read the instruction manual or to comply
with the warnings and references contained herein can
result in serious bodily injury or instrument damage.
Contents
Page
15