Launch Creader V+ Manuel De L'utilisateur page 7

LAUNCH
unattended while running tests.
• Use extreme caution when working around the ignition coil, distributor
cap, ignition wires and spark plugs. These components create hazardous
voltages when the engine is running.
• Put the transmission in P (for A/T) or N (for M/T) and make sure the parking
brake is engaged.
• Keep a fire extinguisher suitable for gasoline/chemical/ electrical fires
nearby.
• Don't connect or disconnect any test equipment while the ignition is on or
the engine is running.
• Keep the Creader V+ dry, clean, free from oil/water or grease. Use a mild
detergent on a clean cloth to clean the outside of the Creader V+, when
necessary.
Creader V+ English User's Manual
EN
VII