LAUNCH
3.5 Tool Setup
Select [Tool Setup] in the Main Menu and press [
the interface as shown below:
This option allows you to make the following settings:
1) Select language: Selects desired language.
Choose [Language] and press [
shown below:
Press [ ] / [ ] key to select the desired language and press [
The system will convert to the chosen language interface at once.
2) Set measurement unit: allows you to define the measurement unit.
Choose [Unit of Measure] and press [
as shown below:
Creader V+ English User's Manual
Figure 3-2
], the screen will display the interface as
Figure 3-3
], the screen will display the interface
], the screen will display
] to confirm.
EN
9