Erase Codes - Launch Creader V+ Manuel De L'utilisateur

LAUNCH
If there are some codes, the screen will display the codes as shown below:
3/37 indicates there are 37 codes total and now P0102 is the third code to
display.
The screen will also show the content of the code below the number of code.
Press [ ] to view the next code.
After viewing all the codes, press [ ] to return to the Diagnostic Menu.

4.2.2 Erase Codes

Select [Erase Codes], the screen will display the interface as shown below:
Creader V+ English User's Manual
Figure 4-5
Figure 4-6
EN
13