Conrad SkyRC NC2500 Mode D'emploi page 63

All manuals and user guides at all-guides.com
Show details
If more details are to be displayed, tough the button „details" at the lower edge of the display.
Choose the desired rechargeable battery for which you want to display data by touching the
rechargeable battery symbols in the upper part of the display.
If you touch the number button with the gear icon below the chosen rechargeable battery, you
will get to the selection or setting of the rechargeable battery programme.
At the centre of the display, the respective cell voltage appears as a figure; the lower part shows
further information, e.g. the measures internal resistance.
Other
To record the voltage curve, the iPhone/iPad/iPod must remain switched on during charging or
discharging. The charger transfers only the current data by Bluetooth. Storage of the measured
values of the voltage curve in the charger does not take place.
63