Conrad SkyRC NC2500 Mode D'emploi page 43

All manuals and user guides at all-guides.com
• Do not leave packaging material lying around carelessly. It might become a dangerous
toy for children!
• Handle the product with care; impacts, shock or fall even from low heights will
damage it.
b) Site of Setup
• The product is intended for dry indoor use only. The product will be destroyed if it
becomes damp or wet.
The mains adapter also poses danger of a potentially fatal electrical shock!
• Choose a solid, flat, clean and sufficiently large surface for the charger.
Never place the charger on a flammable surface (e.g. carpet, tablecloth). Always
use a suitable, non-flammable, heatproof surface.
Do not place the charger on any valuable furniture surfaces without using a suitable
protection. Heat may cause colour or material changes.
Keep the charger away from easily inflammable materials (e.g. curtains, paper),
liquids (e.g. petrol) or gases.
Set up the charger so that the fan at the bottom of the charger is not covered. If
required, fold out the base at the bottom of the charger.
• Do not place any containers filled with liquid, e.g. vases or plants, on or next to the
product.
When these liquids get into the charger, the charger will be destroyed and there is
great danger of fire or explosion.
In this case, immediately disconnect the product from the power supply, then re-
move any inserted batteries. Do not use the charger again - bring it to a specialist
workshop.
If any liquids get into the mains adapter, power down the mains socket to which the
mains adapter is connected on all poles. For this, turn off the corresponding circuit
breaker or unscrew the fuse. Then switch off the corresponding FI circuit breaker.
Then unplug the mains adapter from the mains socket. Do not use the mains adapter
anymore and take it to a specialized workshop or dispose of it according to the legal
provisions.
43