Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
6.
Make certain the power source conforms to requirements of your
equipment (see Specifications).
7.
When wiring an electrically driven device, follow all electrical and
safety codes, as well as the most recent Canadian Electrical Code
(CE) and Canadian Centre for Occupational Health and Safety
(CCOHS).
WARNING! All wiring should be performed by a qualified electrician.
BATTERY PRECAUTIONS
WARNING! Connect and disconnect the DC output clips only after
setting any control switches to the OFF position and removing the
AC power cord from the electric outlet. Never allow the clips to
touch each other.
1.
Lead-acid batteries generate oxygen and hydrogen. These gases
can be explosive. Keep batteries well ventilated. Remove any
source of ignition such as an open flame or a tool like a heater
from the area. Sparks may also ignite the gas.
2.
Lead batteries contain sulfuric acid, also referred to as
electrolyte or battery acid. The acid is corrosive and can cause a
skin burn if leaking or splashed. The acid may also pose a threat
if inhaled or ingested accidentally. The acid can destroy normal
clothing and injure the flesh underneath. Wear splash-proof
goggles and protective clothing when handling a battery.
3.
Batteries are heavy due to the weight of the lead and liquid
contained inside. A lead-acid battery could weigh upwards of 50-
60 lbs. Use safe lifting methods if moving the battery.
BATTERY LEADS SAFETY
WARNING! DO NOT touch two connectors together while the unit is
connected to a vehicle battery. This will cause a discharge and may
result in electrocution.
1.
Do not operate this tool if the leads are frayed or damaged as an
electric shock or surge may occur, resulting in personal injury or
property damage.
1.1
Inspect the leads for cracks, fraying or other faults in the
insulation before each use.
Visit www.princessauto.com for more information
3,500 LB 12V DC UTV WINCH
8798167
7
Publicité
Table des Matières
