Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8798167
A snatch block will halve the line speed when pulling the load.
POWER CONSUMPTION
The winch requires more amps to move a heavier load. Consult
Table 2 to determine the amperage consumption based on the
load's weight.
A snatch block increases a winch's pulling power without an increase
in amperage. Using a snatch block can halve the power required.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical replacement
parts when servicing.
3.
Follow instructions for lubricating and changing accessories.
4.
Only use accessories intended for use with this tool.
5.
Keep the tool handles clean, dry and free from oil/grease at
all times.
6.
Maintain the tool's labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd.
for replacements.
WARNING! Only qualified service personnel should repair the tool.
An improperly repaired tool may present a hazard to the user
and/or others.
CLEANING
Clean the external surfaces with cloth after each use. A soft toothbrush
may be used in hard to reach places.
CABLE CLEANING
A cable will accumulate debris over time. This debris can act as an
abrasive on the cable and damage it.
Spread the cable out on a clean surface and spray it clean with a
garden hose. Scrub the wire strand cable with a wire brush to loosen
dirt and rinse. Commercially available cleaners may also be used.
16
3,500 LB 12V DC UTV WINCH
For technical questions call 1-800-665-8685
V1.0
Publicité
Table des Matières
