SCS Sentinel SCS G Manuel D'installation Et D'utilisation page 33

- Frequently examine the installation, in particular check cables, springs and
mountings for signs of wear, damage or imbalance. Do not use if repair or
adjustment is needed since a fault in the installation or an incorrectly balanced
door may cause injury.
- Each month check that the drive reverses when the door contacts a 50 mm
high object placed on the floor. Adjust if necessary and recheck since an incor-
rect adjustment may present a hazard, for drives incorporating an entrapment
protection system depending on contact with the bottom edge of the door.
- Details on how to use the manual release.
- bInformation concerning the adjustment of the door and drive.
- Disconnect the supply when cleaning or carrying out other maintenance.
- The installation instructions shall include details for the installation of the drive
and its associated components.
EN ::: 4