Installation - SCS Sentinel SCS G Manuel D'installation Et D'utilisation

Installation

1) Read the instruction carefully.
2) Make sure the door structure is solid and suitable to be motor driven.
3) Make sure when the door is moving there are no friction point.
4) The door must be properly balanced and must be easily lowered
and raised by hand.
1) Track
2) 24V DC flash light (optional)
3) Wall switch
4) Photo beam (optional)
Maintaining a minimum gap of 30mm from the top panel's maximum height (Fig. 2).
Make sure the track is horizontal and vertical to the shaft. Make sure the connection of
hanging bracket F and ceiling is firm enough (Fig. 3).
Warning: Make sure the opener is affixed to noggins in ceiling and not to plasterboard.
Failure to have a safe and secure fixing will lead to opener falling, and cause serious
persons and /or property damage.
5) O/S/C button
6) Power socket
7) Door opener
EN ::: 5