Safety Instructions; Building-In Dimensions - Atag Cook-light Mode D'emploi

safety instructions

1. This appliance should only be connected up
by an electrotechnical fitter.
2. During and after use, the appliance is hot.
You should bear this in mind if you have
young children.
3. Ensure that no damp gets into the
appliance.
4. The cooking surface is very strong. But a
falling salt-cellar, for example, could cause
a crack in it. As soon as a crack is observed
in the cooking surface, the appliance should
immediately be disconnected from the
power supply. In this situation, do not use
the appliance any more and contact Atag's
service department.
attention
If the worktop has a raised edge, the hob should
be installed behind this raised edge.

building-in dimensions

model: HL2..C
model: HL2..B / HL2..L