General Description; Application; Coating Materials; System Diagram - Titan ED655 Mode D'emploi

General Description
2.

General Description

2.1

Application

This high performance airless sprayer is a precision power tool used
for spraying many types of materials. Read and follow this instruction
manual carefully for proper operating instructions, maintenance and
safety information.
2.2

Coating materials

Processible coating materials
Pay attention to the Airless quality of the coating
i
materials to be processed.
Latex paint, dispersion paints, fire protection and thick film materials,
zinc dust and micaceous iron ore paints, Airless spray primer,
sprayable glue, anti-corrosive agents, thick coating materials and
bitumen-like coating materials.
No other materials should be used for spraying without Titan's
approval.
Viscosity
It is possible to work with high-viscosity coating materials with the
devices.
If highly viscous coating materials cannot be sucked up, they must be
diluted in accordance with the manufacturer's instruction.
Two-component coating material
The appropriate processing time must be adhered to exactly. Within
this time rinse through and clean the unit meticulously with the
appropriate cleaning agents.
Coating materials with sharp-edged additional materials
These have a strong wear and tear effect on valves, high-pressure
hose, spray gun and tip. The durability of these parts can be reduced
appreciably through this.
2.3 System Diagram (Fig. 1)
1. PRIME/SPRAY knob
2. Return tube
3. Hopper assembly
4. Pressure control knob
5. Motor ON/OFF switch
4
5
All manuals and user guides at all-guides.com
GB
2.4
4
1
4

Technical Data

Weight
Max. Volume Flow
Power Requirement
10 amp minimum circuit on 220-240 VAC,
Power Consumption
Short Circuit Current
Max. Fluid Pressure
Dimensions L x W x H
Max. sound pressure level
Vibration Levels
Spray Gun
Handle
* Place of measurement: 1 m distance from unit and 1.60 m
above reverberant floor, 120 bar (12 MPa) operating pressure.
2
3
17 kg (37 lbs)
0.35 gal (1.25 l)/min
50/60 Hz current, 1 PH
1000 W
8 A
20.7 MPa (207 bar, 3000 PSI)
40.6 cm x 30.5 cm x 32 cm
(16" L x 12" W x 12.6" H)
less than 70dB (A)*
< 2.5m/s2
6.5m/s2 when unit is operating
ED655