Alarm; Camera Control; Delete A Camera; Add (Pair) A Camera - Luvion GRAND ELITE 2 Manuel D'instructions

5.5 ALARM

1. Press the MENU button and the menu bar will pop up.
2. Press the LEFT button or
3. Press the UP button or
6h and OFF. ( The default setting is OFF )
4. Press the OK button to con rm.

5.6 CAMERA CONTROL

5.6.1 Delete a camera

1. Press the MENU button and the menu bar will pop up.
2. Press the LEFT button or
the de add/view/scan menu will pop up.
3. Press the UP button or
OK button to con rm.
4. cam 1 / cam 2 / cam 3 / cam 4 will pop up, press the
button to select the desired CAM, and press the OK button to delete that registra-
tion on your Monitor Unit.
NOTE
A CAM channel needs to be deleted before pairing to a new Camera Unit.

5.6.2 Add (pair) a camera

1. Press the MENU button and the menu bar will pop up.
2. Press the LEFT button or
the de add New / scan menu will pop up.
3. Press the UP button or
button to con rm.
4. cam 1 / cam 2 / cam 3 / cam 4 will pop up, press the
button to select the desired CAM, and press the OK button to start searching for a
Camera Unit
5. Press and hold the PAIR key underneath the Camera Unit for at least 3 seconds. The
power LED light (green LED light, located directly below the camera lens aperture)
should ash green to indicate the Camera Unit is in pairing mode. If it does not ash,
RIGHT button until
DOWN button to select the desired time from 2h, 4h,
RIGHT button until
DOWN button to select the DEL icon, and pressthe
RIGHT button until
DOWN button to select ADD icon, and press the OK
LUVION
Premium Baby products
Alarm Icon is highlighted.
Cam icon is highlighted, and
UP button or
Cam icon is highlighted, and
UP button or
17
DOWN
EN
DOWN