Garniture Inférieure (En Option); Removing The Lower Trim - Travis Industries Fireplace Xtrordinair ProBuilder 24 CF Manuel D'installation

Table des Matières

Publicité

34
Garniture inférieure (en option)
La garniture inférieure en option est livrée pré-fixée au bas de l'assemblage d'écran sur le foyer. Il couvre la zone
près de la base de la cheminée. L'installateur peut laisser la garniture en place ou la retirer pour mieux s'adapter
à l'installation. Lorsqu'il est installé, l'installateur n'aura pas besoin d'installer le revêtement (ou le foyer) dans la
zone sous l'assemblage de l'écran (voir les illustrations ci-dessous).
Without Lower Trim With Lower Trim
Sans garniture inférieure

Removing the lower trim

1. Remove the screen assembly from the fireplace and place it face down on a non-scratching surface (e.g.:
cardboard).
2. Remove the 3 nuts holding the each door hinge in place (both sides – see photo below to the left).
NOTE: Do not move or lift the face during installation – the door hinge may come loose and bind.
3. Remove and discard the lower trim (see photo above to the right). Replace the 3 nuts (both sides) to
secure the hinge. Replace the screen assembly on the fireplace.
© Travis Industries
Installation
(for qualified installers only)
Hearth
Plywood
Contre-plaqué
Max 1"
Combustible
Le parement
facing must
combustible doit
overlap 1" of
chevaucher 1
the lower
"de la façade
front of the
inférieure du
fireplace
1/8"
foyer
Combustible
Contre-plaqué
Plywood
Facing
Encadrement
Framing
5/26/21 – 1512-FR
Avec garniture inférieure
Lower Trim
Installed
Lower Trim
Installed
1/8"
Combustible
Facing
PB 24 CF MV/GSB2 Install
Niveau de plate-
Platform level
with hearth
forme avec foyer
Plywood
Contre-plaqué
Le revêtement
Combustible
combustible peut
facing may
chevaucher
overlap up to
1" of the
jusqu'à 1 "de la
lower front of
façade inférieure
the fireplace
du foyer
Contre-plaqué
Plywood
Framing
Encadrement

Publicité

Table des Matières
loading

Table des Matières