Parent Unit; Function Menu; Adjusting Speaker Volume - weewell WMA400 Mode D'emploi

Parent unit

1. Press and hold the on/off button for about 2 seconds to
switch on the unit.
2. All light indicators on the parent unit and the LCD screen will
briefly light up with an opening animation.
3. The LINK light will flash in red as it seeks connection with the
baby unit.
4. When the connection has been established, the LINK light
will then be on continuously in green.
5. Press and hold the on/off button for about 2 seconds to
switch off the unit.

Function Menu

1. Press the MENU button on the parent unit to open the menu.
2. Press the + or - keys to scroll the menu to the next item.
3. Press the OK button to confirm a selection.
4. Press the MENU button to navigate one level up in the menu at the display or exit
the current menu.

Adjusting Speaker Volume

1. Press the volume + or – buttons on the parent or baby unit until the desired
speaker volume (five levels to adjust) for the parent unit has been reached.
2. The displays give visual feedback on the volume settings of the units:
Note:
If the volume is set to a high level, the parent unit consumes more power.
14 I
WMA400 USER MANUAL
= Parent unit volume switched off/ silent baby
monitoring
= Minimum volume
= Maximum volume