weewell WMA400 Mode D'emploi page 18

Voice Recording
1. Press the REC button on the baby unit to open the recording
menu.
2. Press and hold the REC button on REC 1 / REC 2 to start voice
recording as REC1 / REC2.
3. Talk clearly into the microphone from a distance of approximately 15-30cm,
a beep tone will play to signify the start of the recording and play "Recording
00:0_"on the display and count the recording time.
4. Release the REC button when you have finished recording, it will end the record-
ing with 2 beep tones and flash 'Rec. ends' .
5. The display shows 'Saved' .
6. Repeat steps 1-4 again to overwrite the current message with a new one.
Play Back (for baby unit)
1. Press the REC button (do not hold the button).
2. Select the specific message to listen to with the + and – buttons.
3. Press the play/stop button to play or stop.
4. The recorded message will play once.
Play Back (for parent unit)
1. To playback, select 'lullabies' in the menu with the + and – buttons.
2. Press the OK button to confirm.
3. Select 'Playback recorded data' .
4. Press the OK button to confirm.
5. Select the specific message to listen to with the + and – buttons.
6. Press the OK button to confirm.
7. The recorded message will play once.
Delete Voice Messages (for parent unit)
1. To delete voice messages, select 'Delete recorded data' in the menu with the +
and – buttons.
2. Press the OK button to confirm.
3. Select the specific message to delete with the + and – buttons.
4. Press the OK button to confirm.
5. The recorded message will be deleted and the display will show 'Deleted' .
18 I
WMA400 USER MANUAL