Test The Unit Before Use; Frequency Setting - weewell WMA235 Mode D'emploi

All manuals and user guides at all-guides.com
Help protect the environment
Batteries bearing one of the symbols shown below must not be disposed
of in normal domestic waste. Please take them to a collecting point for old
batteries or special waste products (as your local authority for details) or
return them to the dealer you bought them from. He will ensure they are
disposed of safely.

Test the unit before use:

• Transmitter emission:
1. By using the SENSITIVITY knob you can turn in the sensitivity of the
transmitter individually, according to your wishes.
2. If the transmitter hears hardly any noise, after 8 seconds., it automatically
switches to the VOX mode
• Receiver reception:
1. By turning the volume knob from right side the receiver will be turned
on. After turning it on power indicator light is shown in green. The channel
is being used and the channel light will show in red. By turning the volume
more you can adjust as you wish.
2. If the unit receives a volume signal, level indicator lights with the volume
of the sound changes
3. A few seconds after the unit receives no more signals, the receiver is
automatically switched to energy saving mode. At the same time, the
backlight off.
• Set Up & Use

Frequency setting:

• Push the "SETTING" button one time, when the "CH" icon on LCD screen
flashes, please push "CHANNEL" button to change the channel.
I
7
WMA235-236 USER MANUAL