Important - VALBERG WF 914 B S180C Consignes D'utilisation

B
Using the appliance
- A water inlet hose (in the drum or already
5
installed)
- A cold water inlet hose
6 A U-bend (in the drum or already installed)
7 A lower hatch cover (depending on the model)
Before using the washing machine, be sure to remove the transit bolts used to protect the
machine during transportation!
IMPORTANT: failure to remove the transit bolts may
damage the machine.
1. Partially unscrew all the transit bolts (by about 30 mm) in the direction of the arrow using
the spanner (do not fully unscrew them).
6 EN
B
Using the appliance
2. Push two transit bolts towards the inside of the machine, then fully unscrew the transit bolts.
3. Remove the transit bolts along with the rubber part and the plastic shim.
4. To make the machine safe and reduce noise, plug the holes using the plastic caps provided
(see appendix provided with the machine). Push the plugs into the holes and turn them in the
direction indicated by the arrow until they click into place.
IMPORTANT: Keep the transit bolts and the spanner.
They must be put back in position when transporting the
washing machine. To refit them, repeat this procedure
in reverse.
7 EN