VALBERG WF 914 B S180C Consignes D'utilisation page 15

15
B
Using the appliance
20°C
Delayed Start function
• The delayed start function allows the machine to be started at a time set by the customer,
e.g. at night, when electricity tariff is cheaper.
• This button can only be used to select the delayed start function when the machine is in
standby mode.
• Once the delayed start function has been selected, each press of this button will increase
the duration by one hour. Before selecting a delayed start, if the program duration is not a
multiple of one hour, the number of minutes must be rounded up to the next full hour when
the delayed start button is pressed for the first time. Each subsequent press of the button
will then increase the duration by one hour. After selecting the delayed start function and
before the program has started, the delayed start can be cancelled by turning the knob to
select other programs.
15
• The delayed start time must be greater than the duration of the washing program, as this
is in fact the time at which the program will end. For example: if the duration of the selected
program is 02:28 h, the delayed start time must be between 03:00 h and 24:00 h.
20°C
• During the delayed start process, the "delayed start" icon will light up. Once the delay
process is complete, the "delayed start" icon will switch off and the "... remaining time" icon
will light up.
Mute function
• When the machine is waiting, in standby or running, press the "Spin + Options" buttons for
2 seconds. The message "bEEP oFF" will appear on the screen.
• All the sounds will be deactivated, except for the alarms. When the machine is in mute mode,
press the "Rinse + Spin" buttons for 2 seconds until the "bEEP oFF" message appears. All
the sounds will be reactivated.
Automatic weighing
• The washing machine displays "----" after starting, indicating that it is automatically weighing
the load. It will automatically adjust the duration of the program (hours: according to the
weight of the clothes to be washed.
26 EN
B
Using the appliance
Child lock
• For increased child safety, this machine has a child lock function.
• Once the program starts, press the "Temp. + Spin" buttons for 2 seconds. The Child Lock
icon lights up and the lock is activated. Repeat the same step to deactivate the child lock.
• When the child lock is activated, all the buttons are protected.
• When you switch off the machine by pressing the "On/Off" button, the child lock is deactivated.
• At the end of the program, the child lock is automatically unlocked.
To start the program
• After selecting your options and adding the washing products to the dispenser drawer, open
the water supply and press the "Start/Pause" button. The screen displays the progress of
the current program with icons going from left to right. It also displays the remaining time
of the program.
To cancel the program or re-select some options
1. Press the "On/Off" button for 2 seconds to turn off the machine.
2. Press the "On/Off" button to turn on the machine. Select the new program and options.
3. Press "Start/Pause" to start the new program without adding additional washing products.
End of the program
• When the program is finished, the "End" message appears on the display. If no action is
taken within 2 minutes, the machine will automatically turn off.
1. Press the "On/Off" button for 2 seconds to turn off the machine;
2. Turn off the tap;
3. Open the door and take out the clean laundry;
4. Leave the window slightly open to allow the moisture inside to dissipate.
27 EN