VALBERG WF 914 B S180C Consignes D'utilisation page 14

B
Using the appliance
(1) The washing program used to test wash performance is: Eco 40-60.
(2) The special anti-allergy steam and special baby clothing steam programs are both suitable
for sterilising colourfast clothes. If you see any vapour on the door, do not touch it or open
the dispenser drawer. This may result in burns.
(3) The Eco 40-60 program is suitable for washing normally soiled cotton laundry that is
resistant to washing temperatures of 40°C and 60°C in the same wash cycle.
Add the washing products, close the door and select the program
• Load the laundry to be washed in the drum and close the door. Add the washing products
to the corresponding compartments according to the type of program you want to select.
Add the washing products as described in the Washing products section of the User Manual.
1. Press the "On/Off" button.
2. Turn the program selector knob to the program you want. By default, it is set to the "Cotton"
program.
3. Select the washing temperature, the spin speed and the number of additional rinses by
pressing the "Temp. " and "Spin" buttons.
4. Press the "Options" button to select other functions.
5. After starting the program, the display shows the program duration (hours: minutes),
number of rinses, wash temperature and the additional optional functions, in this order.
24 EN
B
Using the appliance
Selecting additional functions
• In standby mode, press the "Options" button to select an additional function to be added to
the current program. Select only one function with each press. The corresponding icon starts
flashing. After launching the program, it can no longer be modified.
Prewash
• Select this function to start the pre-wash cycle in order to boost the cleaning effect and
remove the toughest stains. This function is suitable for heavily soiled clothes.
• Before starting the cycle, you can add washing products to the pre-wash compartment and
you must put some in the main wash compartment.
Intensive
• This function extends the washing time, to wash in greater depth and to remove stains
more effectively.
Extra rinse
If you select the extra rinse function, the machine will start the rinsing process again before
switching to the softener program and the total running time of the cycle will increase
20°C
accordingly.
Water inlet warning
• If the water inlet tap is not open or the water pressure is too low, you will be alerted by the
water inlet error icon and the error code "F01" appearing on the display.
Water drainage warning
• If the hose is kinked, the water will not drain smoothly. If it cannot fully drain the water for a
long time, the drainage error icon will appear and the display will show the error code "F03".
Door lock icon
• Once the program has started, the Door Lock icon will light up and the door will be locked.
• At the end of the program, the door is automatically unlocked. In standby mode, if the
conditions are suitable for opening the door, it will unlock and the corresponding indicator
lights up.
• When the door lock indicator light flashes, it means that the door
cannot be opened by force. This is to prevent injury.
25
15
EN