elco TRIGON XL 300 Notice D'installation Et D'emploi page 39

Operating instructions
Overview of main functions
Operation by manual
setpoint
Change factory setting
boiler temperature
Deaeration
Activate chimney sweeper
mode
j
Temporary reduction of
reduced temperature on
C
QAA75
Reset button
All manuals and user guides at all-guides.com
Press button 1x
Press button
Press button
Turn wheel -/+
Press button
Press button
Press button
Press button > 3 sec.
Press button > 3 sec. again
Press button (< 3 sec.)
Press button again (< 3 sec.)
Press button
Press button again
Press button (< 3 sec.)
Press button again > 3 sec.
Manual mode on (spanner symbol appears)
- Haeting by fixed setpoint (factory setting = 60 °C)
301: Manual mode
blinking temperature
set value
Status boiler
Manual mode off (spanner symbol disappears)
312: Deaeration on
Deaeration off
Chimney sweeper mode on
Chimney sweeper mode off
Heating by reduced setpoint
Heating by comfort setpoint
Boiler manually blocked, no release
Boiler released, Alarm symbol disappears
39
EN