Displaying The Heart Rate Frequency; Training Time (Start, Stop, Reset) - Sigma PC 3.11 Mode D'emploi

2.2 DISPLAYING THE HEART RATE FREQUENCY

The PC 3.11 is in sleep mode.
The chest belt is attached.
Press the top button to activate training mode.
The current heart rate appears in the display.

2.3 TRAINING TIME (START, STOP, RESET)

The PC 3.11 is in sleep mode.
The chest belt is attached.
22
www.sigmasport.com
2.3 TRAINING TIME (START, STOP, RESET)
Press the top button to activate the PC 3.11.
Start the stopwatch by pressing the top button.
Stopwatch starts running.
For the first hour of training, the stopwatch displays
the time including the tenths of seconds. If you train
for more than an hour, the training time is displayed
in the format h:mm:ss.
Stop the stopwatch by pressing the top button.
Stopwatch stops running.
The stopwatch can be restarted by pressing the
top button again.
Reset the stopwatch to zero by keeping the top button
pressed down until "hold", "RESET" and then 0:00:00
appears in the display.
23