Reset Handset - Topcom Butler 575 plus Mode D'emploi

Butler 575 plus

5.16 Reset Handset

This function is used to reset the handset settings to default values.
There are two possibilities :
1: RESET ALL
The babycall (direct call) number and all the memory numbers are erased.
2: INITIALIZE
All default handset parameters have been reset.
Key click :
Ring volume:
External ring melody:
Internal ring melody:
Speaker Volume:
5.16.1 Resetting the handset
• Press the Function button until "H-RESET" is
shown on the display.
• Press the OK button.
• On the display "PP PIN :" is shown.
• Enter the PIN code and press the OK button.
• "RESET ALL" is displayed.
- If you want to erase all current values, press the
OK button.
- If you press the Function button "INITIALIZE"
is shown on the display. Press the OK button,
the default values have been reset.
• The unit returns to the "H-RESET" menu.
Note : To terminate the subscription of a handset, press the Power and the INT button at the same
time while the handset is deactivated. On the display " F->CLEARSUBS" appears. Press the Function
button, the handset is no longer subscribed to the base unit. On the display "NOT SUB" appears.
on
level #9
melody #4
melody #7
Middle
H - - R E S E T
PP PIN:
RESET ALL
I N I T I A L I Z E
H - - R E S E T
68