The Rfpi Code; Change Master Pin Code (Base Station) - Topcom Butler 575 plus Mode D'emploi

Butler 575 plus
• Then "RETYPE" is shown on the display.
• Enter the new PIN code once again.
• Press the OK button to confirm and the unit
returns to the "H-CHANGE PIN" menu.

5.13 The RFPI code

This function allows you to display the RFPI code. The RFPI code is the identification
code of the base unit to which the handset belongs.
• Press the Function button until "SHOW RFPI"
is displayed.
• Press the OK button.
• The RFPI Code is shown on the display.
• Press the OK button, the unit returns to the
"SHOW RFPI" menu.

5.14 Change Master PIN Code (base station)

The master PIN code is an essential part of the sytem. Therefore it should be
changed as soon as possible. The factory setting is 1590. The new master PIN code
will only replace the current one, if the PIN code is entered correctly twice and if
the below mentioned procedure is not interrupted.
• Press the Function button until "BASE SETTING"
is displayed.
• Press the OK button.
• Press the Function button until "B-CHANGE PIN"
is shown on the display.
• Press the OK button.
• On the display "FP PIN :" is shown.
• Enter the current PIN code and press the
OK button.
• "WAIT" is displayed for a moment. When "NEW
PIN" is displayed, enter the new Master PIN code.
• Press the OK button.
R E T Y P E :
H--CHANGE PIN
SHOW RFPI
00004--00 1AB
SHOW RFPI
BASE SETTING
B--CHANGE PIN
FP PIN:
NEW PIN:
66 66 66 66