Reset Handset; Resetting The Handset - Topcom Butler 2000 Mode D'emploi

Butler 2000
5.15.1 To reset the default settings base unit
• Press the Function button until "BASE SETTING"
is displayed.
• Press the OK button.
• Press the Function button until "BASE RESET :"
is shown.
• Press the OK button and enter the base PIN code.
• Press the OK button and select the "INITIALIZE"
menu.
- When the OK button is pressed, all current
values are erased.
- When the Function button is pressed and the
"RESET ALL" menu is selected, all subscription
data will be erased after pressing the OK button.
• The handset returns to the "NOT SUB" menu and
needs to be subscribed again to a base unit
(see 5.3 Subscribing a handset to a base station).

5.16 Reset Handset

This function is used to reset the handset settings to default values.
There are two possibilities :
1: RESET ALL
The babycall (direct call) number and all the memory numbers are erased.
2: INITIALIZE
All default handset parameters have been reset.
Key click :
Ring volume:
External ring melody:
Internal ring melody:
Speaker Volume:

5.16.1 Resetting the handset

• Press the Function button until "H-RESET" is
shown on the display.
BASE SETTING
BASE RESET
I N I T I A L I Z E
RESET ALL
NOT SUB
on
level #9
melody #4
melody #7
Middle
H - - R E S E T
70 70 70 70