Automatic Answer; Reset The Handset - Topcom BUTLER E400 Manuel D'utilisateur

6.5

Automatic answer

When there is a incoming call and the handset is on the base, the phone automatically takes the
line when lifted. This is the default setting, but can be set off:
1 Enter the menu
2 Select "HANDSET" and confirm.
3 Select "AUTO ANSWER" and confirm.
4 Select "ON" to activate or "OFF" to deactivate and confirm.
6.6

Reset the handset

It is possible to return the phone to the original default configuration. This is the configuration
which was installed when you first received the telephone.
To return to default settings:
1 Enter the menu
2 Select "SETUP" and confirm.
3 Select "DEFAULT" and confirm.
4 Enter the 4 digit PIN code (default =0000) and confirm.
4 5 6
GHI JKL MNO
DEFAULT PARAMETERS ARE:
Low battery beeps
Out of range warning beeps
Key tone
Auto answer
Internal melody
Internal volume
External melody
External volume
Ear volume
Phonebook
Call log list
Redial list
Pin code
Dial mode
Keypad lock
Returning to default settings will delete all entries in the phonebook and call log.
The PIN code will also be reset to 0000.
Personalize the handset
On
Off
On
On
1
3
3
3
3
Empty
Empty
Empty
0000
DTMF
Off
13