Cafe C2Y366 Manuel D'utilisation page 32

Care And Cleaning
CONTROL PANEL AND KNOBS
It's a good idea to wipe the control panel after each use.
Clean with mild soap and water or vinegar and water,
rinse with clean water and polish dry with a soft cloth.
Do not use abrasive cleansers, strong liquid cleansers,
plastic scouring pads or oven cleaners on the control
panel because they will damage the finish.
For easier cleaning, the control knobs may be removed
by pulling them directly outwards once the knobs are in
the OFF position. Do not pull knobs up or down or hang
objects on them. This can damage the gas valve shaft.
See the Surface Burner section for a detailed view of
these knobs. The knobs can be washed by hand with
soap and water.
When removing the oven and burner knobs, remember
their location. The knobs are not interchangeable,
these knobs must be placed in the same location after
cleaning. See the Surface Burner and oven control
sections for a detailed view of these knobs. To replace
knobs after cleaning, align the bottom of the knob with
the matching clip orientation to the shaft inside the bezel.
Oven Knob
BROILER PAN, GRID AND ROASTING RACK (Optional Accessories)
CAUTION
Do not clean the broiler pan, grid or
roasting rack in a self-cleaning oven.
The broiler pan, grid and roasting rack are all
dishwasher safe. However, baked on foods may require
49-2000660 Rev. 3
Encoder
Grid
Push knob until completed seated.
bezel. Do not remove diffuser film. Do not expose to
moisture or it will damage lighting electronics.
NOTE: The Mini Knob is not removable.
Flat
Side
Align larger bezel tab with
encoder larger slot
washing by hand with a commercial oven cleaner or
abrasive detergent.
Do not store a soiled broiler pan or grid anywhere in the
oven. Always properly dispose of excess grease.
Broiler pan
Front
Flat Side
Burner Knobs
Roasting Rack
Control Panel
31