Télécharger Imprimer la page

Scheppach Air Case Traduction Des Instructions D'origine page 21

Masquer les pouces Voir aussi pour Air Case:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
12. Troubleshooting
Fault
Possible cause
No supply voltage.
Insufficient supply voltage.
The compressor does
not start.
Outside temperature is too low.
Motor is overheated.
The non-return valve leaks.
The compressor starts
The seals are damaged.
but there is no pres-
sure.
The drain plug for condensation water
leaks.
The hose connections have a leak.
The compressor starts,
pressure is shown on
A quick-lock coupling has a leak.
the pressure gauge, but
Insufficient pressure set on the pressure
the tools do not start.
regulator.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
Remedy
No supply voltage.
Insufficient supply voltage.
Outside temperature is too low.
Motor is overheated.
The non-return valve leaks.
The seals are damaged.
The drain plug for condensation water leaks.
The hose connections have a leak.
A quick-lock coupling has a leak.
Insufficient pressure set on the pressure regu-
lator.
GB | 21

Publicité

loading

Ce manuel est également adapté pour:

5906118901