Mounting And Installation Of The Tank - hajdu C50S Guide De Montage Et D'utilisation

4. MOUNTING AND INSTALLATION OF THE TANK

The mounting (4) of the hot water tank, as well as its connection to
the water (5) and electrical network (6) and commissioning must be
performed by a qualiied professional according to our instructions and
observing the standards IEC 60364 / MSZ HD 60364.
you will lose all your guarantee and warranty rights!
At the installation location, suitable electrical and water supply and sewage
system must be ensured, and before mounting, the structure of the wall must
also be checked by an architect for compliance.
We recommend the following solutions for mounting the appliance:
The wall must be statically suitable for the mounting of the water heater. In case
of stone, brick or concrete wall of at least 150 mm thickness, hexagonal through
bolts [M12 8.8; ISO4017 / DIN933] must be used along with 50x5 mm flat steel
reinforcement [MSZ4342 / DIN1017] placed horizontally on the other side of the
wall. On the side of the water heater, M12 [DIN 6923] collar nuts must be used.
In case of thinner walls, hexagonal through bolts [M12 8.8; ISO4017/DIN933]
must be used along with a horizontally placed 60x40x3 mm U shaped steel profile
[MSZEN 10279/ DIN1026] reinforcement.
On the side of the water heater, M12
[DIN 6923] collar nuts must be used.
The collar nuts are put on the through
bolts in the wall before the mounting
of the appliance leaving 8 mm distance
between the wall and the collar nut.
Then the appliance is hanged on the
bolts. After positioning the appliance,
tighten the nuts.
• The hot water tank may be placed in
section 1 or 2 indicated in the picture,
observing the standard MSZ HD 60364.
• In case of vertically positioned hot wa-
ter tanks, at least 700 mm service dis-
tance must be left from the side of the
service opening.
In case of improper connection and installation,
The tank must be installed and operated
in a frost free environment.
Mounting of hanging brackets, side view
Függesztőláb felszerelése, oldalnézet
plastering
vakolat
brick-lined wall tégla falazat
flanged nut M12
átmenőcsavar M12
20-22
8
water
bojler
heater
through bolt
peremes anya M12
M12
hanging bracket
függesztőláb
29
EN