Compressed Air Hook-Up; Safety Regulations - Corghi LaserLine EM 9550 Manuel D'utilisation

COMPRESSED AIR
HOOK-UP
CAUTION
The compressed air hook-up may only be per-
formed if the pneumatic ring nut is supplied
(optional accessory supplied on request).
WARNING
All compressed air hook-ups must be carried
out by qualified personnel only.
- The hook-up to the workshop compressed
air system must ensure a minimum pressure
of 8 bar.
- The union for connecting to the compressed
air system is of a universal type and therefore
no special or additional couplings are
required. A pressure-resistant hose with 6mm
inner diameter and 14mm outer diameter
must be fixed to the notched union using the
hose clamp provided with the machine.

SAFETY REGULATIONS

WARNING
Non-compliance with the instructions and
danger warnings can cause serious injuries to
the operator or other persons.
Do not operate the machine until you have read
and understood all the danger/warning notices
in this manual.
In order to operate the machine correctly, it is
necessary to be a qualified and authorised
operator, able to be trained and to know the
safety regulations. Operators are expressly
forbidden from using the machine under the
influence of alcohol or drugs capable of affecting
physical and mental capacity.
The following conditions are essential:
- read and understand the information and
instructions described in this manual;
- have a thorough knowledge of the features and
characteristics of the machine;
- keep unauthorised persons well clear of the
working area;
48
- make sure that the machine has been installed
in compliance with all relevant standards and
regulations in force;
- make sure that all machine operators are suit-
ably trained, that they are capable of using the
machine correctly and safely and that they are
adequately supervised during work;
- do not touch power lines or the inside of
electric motors or any other electrical equip-
ment before making sure that they have been
powered off;
- read this booklet carefully and learn how to use
the machine correctly and safely;
- always keep this user manual in a place where
it can be readily consulted and do not fail to
refer to it.
WARNING
Do not remove or deface the DANGER, WARN-
ING, CAUTION or INSTRUCTION decals. Re-
place any missing or illegible decals. If one
or more decals have been detached or dam-
aged, replacements can be obtained from
your nearest dealer.
- When using and carrying out maintenance
on the machine, observe the unified indus-
trial accident prevention regulations for high
voltage industrial equipment and rotating
machinery.
- Any unauthorised alterations made to the
machine automatically release the manufac-
turer from any liability in the case of damage
or accidents as a result of such alterations.
Specifically, tampering with or removing the
machine's safety devices is a breach of the
regulations for industrial accident prevention.
WARNING
During work and maintenance operations, always
tie back long hair and do not wear loose clothing,
ties, necklaces, wristwatches or any other items
that may get caught up in the moving parts.
EM 9550 - Operator's manual