Presetting Stations; Recalling A Preset Station - PERFECTPRO CUBI 2 Mode D'emploi

Presetting stations

There are two sets of FM preset station memories (1 to 6 each).
One set is in FM1, another is in FM2. The procedure for setting
presets and using them to tune stations is described below.
1. Press the STANDBY button to turn on the radio.
2. Press the SOURCE button to select FM1 or FM2 and tune to the
required station as previously described.
3. Press and hold the required Preset button (1~6) until radio beeps
and the display shows corresponding "MX" on the upper right
corner.
4. Repeat this procedure for the remaining presets as you wish.
5. Stations stored in preset memories may be overwritten by
following above procedures if required.

Recalling a preset station

1. Press the STANDBY button to turn on the radio.
2. Press the SOURCE button to select FM band.
3. Momentarily press the required Preset button (1~6) to cause
your radio to tune to the station stored in preset memory.
7