Setting The Clock Time - PERFECTPRO CUBI 2 Mode D'emploi

Charging the batteries in Car
The batteries can also be charged in the radio using a 12V car
(cigarette lighter) adaptor, voltage range 10-14V, maximum current
of 2A, DC dimension 2.0 mm inner diameter with positive pole and
6.3 mm outer diameter with negative pole. To charge, connect the
adaptor to the car (cigarette lighter) socket and DC In socket locat-
ed on the side of the receiver.

Setting the clock time

1. Press the Standby button to turn the radio off.
2. Press and hold the Tuning knob, and the clock type 12H / 24H
will begin flashing. Rotate the Tuning knob rightward / leftward
to choose the desired clock format.
3. Press down Tuning knob again and the hour digits will begin
flashing. Rotate the Tuning knob to change the hour digits as
needed.
4. Press and release the Tuning knob to confirm the hour setting,
and the minute digits on the display will flash. Rotate the Tuning
knob to change the minute digits as needed.
5. Press and release the Tuning knob to confirm the minutes setting
and to complete the clock setting. The radio will save your settings.
The display will show saved time after clock time setting is completed.
Note:
The clock time setting function can not be operated by remote control.
3