Search Tuning Fm - PERFECTPRO CUBI 2 Mode D'emploi

Search tuning FM

1. Press the STANDBY button to turn radio on and select FM band
by pressing the SOURCE button as described.
2. Stand up the FM rubber antenna properly to get best reception.
3. Press the Tuning control knob, and the radio will seek forward
and stop automatically when it finds a radio station with good
signal. The radio will seek forward for the next available station if
pressing down the Tuning control knob again.
FM stereo / mono
1. If the FM station is received with a weak or not optimal signal
some hiss may be audible. To reduce the hiss press and release
the Mono button so that the Stereo indicator on the display
is cancelled. Your radio will switch to mono mode.
2. To return to stereo mode press and release the Mono button
so that Stereo indicator on the display is visible. The radio will
switch to stereo mode.
This Stereo / mono switching function is only available in the
FM mode.
Wide stereo effect
It allows effective enhancement of stereo effect and a wider, clear
surrounding sound wherever you are located into your room.
Press the Wide button so that the Wide Stereo indicator shown on
the display. To turn off the wide stereo effect, press the Wide button
again. The Wide Stereo indicator will disappear on the display.
This wide stereo function is available in all the bands (i.e. FM1 /
FM2 / AUX1 / AUX 2 / iPod).
GB
6