Brightwell Brightstar II Mode D'emploi page 32

P
ROGRAMMING
If a flow rate has been set for the pump, the unit will
automatically ask for a dosage to be selected.
The dosage is the volume of product (in ml), which you wish to
be dispensed into the host machine, during a single cycle.
Setting:
UP DOWN
Use the and
FWD/ACCEPT
Use the
to the PUMP ENABLE screen for the next pump (see page 30).
Once all the pumps have been set for the selected input, press
SEE/JUMP
the key to move onto the next input (see page 28).
If all of the inputs have been programmed, press the
SEE/JUMP
key again to move onto the RESET OPTIONS
screen.
P
ROGRAMMING
If no flow rate has been set, the unit will require a run time to be
selected.
The run time is the time for which the selected pump will need to
run, in order to dispense the volume of product for a single
cycle.
Setting:
UP DOWN
Use the and
selected pump will run for.
FWD/ACCEPT
Use the
to the PUMP ENABLE screen for the next pump (see page 30).
Once all the pumps have been set for the selected input, press
SEE/JUMP
the key to move onto the next input (see page 28).
If all of the inputs have been programmed, press the
SEE/JUMP
key again to move onto the RESET OPTIONS
screen.
B L S
RIGHTSTAR AUNDRY YSTEMS
-
D
OSAGE
keys to select the desired dosage (ml).
key to confirm your selection and move
-
R T
UN
keys to alter the amount of time the
key to confirm your selection and move
IME
31
Alternatively:
INPUT2/PUMP4
SET RUN TIME
00MINS 00SEC
Press the
button and the pump
will run.
INPUT2/PUMP4
Once the required
SET RUN TIME
volume of product
00MINS 30SEC
has been dispensed,
press and hold the
TEST
seconds.
PROGRAM 01
SET INPUT 02
SET PUMP 05
T h e
DISABLE
automatically record
the time taken.
PROGRAM 01
SET INPUT 03
SET RESET TO
LAST PUMP
E
NGLISH
INPUT2/PUMP4
DOSAGE
00000ml
INPUT2/PUMP4
DOSAGE
00100ml
PROGRAM 01
SET INPUT 02
SET PUMP 05
DISABLE
PROGRAM 01
SET INPUT 03
SET RESET TO
LAST PUMP
TEST
button for 2
u n i t w i l l
B L S
RIGHTSTAR AUNDRY YSTEMS