Publicité
# ./add_install_client -d -e "00:03:ba:29:f0:de" \
> -b "input-device=ttya" -b "output-device=ttya" \
> -b "bootpath=/pci@0,0/pci108e,16a8@8" \
> -b "boot-args=' - install dhcp'" \
> -c 123.123.123.163:/export/jumpstart \
> -p 123.123.123.163:/export/jumpstart \
> i86pc
cleaning up preexisting install client "00:03:ba:29:f0:de"
To disable 00:03:ba:29:f0:de in the DHCP server,
remove the entry with Client ID 010003BA29F0DE
To enable 010003BA29F0DE in the DHCP server, ensure that
the following Sun vendor-specific options are defined
(SinstNM, SinstIP4, SinstPTH, SrootNM, SrootIP4,
SrootPTH, SbootURI and optionally SjumpCF and SsysidCF),
and add a macro to the server named 010003BA29F0DE,
containing the following option values:
Install server
Install server IP
Install server path (SinstPTH) : /export/s9x
Root server name
Root server IP
Root server path
Boot file
Solaris boot file
Profile location
sysidcfg location
If not already configured, enable PXE boot by creating
a macro called PXEClient:Arch:00000:UNDI:002001
which contains the following values:
Boot server IP
This macro will be explicitly requested by the PXE boot.
Exemple de commande add_install_client et sortie pour Jumpstart sur une blade B100x
FIGURE 10-15
(SinstNM)
: cerberus
(SinstIP4) : 123.123.123.163
(SrootNM)
: cerberus
(SrootIP4) : 123.123.123.163
(SrootPTH) : /export/s9x/Solaris_9/Tools/Boot
(BootFile) : nbp.010003BA29F0DE
(SbootURI) : tftp://123.123.123.163/010003BA29F0DE
(SjumpsCF) : 123.123.123.163:/export/jumpstart
(SsysidCF) : 123.123.123.163:/export/jumpstart
(BootSrvA) : 123.123.123.163
Chapitre 10 Installation de Solaris x86
10-41
Publicité
