Maintenance; Changing The Stripping Knives - WDT AVG 0160 Mode D'emploi

AVG 0160
10

Maintenance

DANGER!
Before starting maintenance, disassembly or repair work, the Strip and Twist Machine
AVG 0160 must be disconnected from power supply. Touching live parts can cause
danger of electrocution with fatal consequences!
CAUTION!
When working with the Strip and Twist Machine AVG 0160, do not wear loose
clothing, jewellery or long, loose hair that can get caught in the Strip and Twist
Machine AVG 0160.
Maintenance work may be performed only by authorized and properly trained
personnel.
10.1

Changing the Stripping Knives

DANGER!
Switch off machine!
Pull out mains plug!
- Using the 2,5mm allen key, unscrew the 2
M3x8 screws in the plexi cover and remove.
(Fig. 10.01)
- Unscrew the knurled screw in the centre of the
revolver head and pull out same.
- Loosen allen screw M3x12 on the roller cone
and remove roller cone with knives.
DANGER!
Knives are sharp-edged – Risk of Injury!
Page 35 / 62
Version 05/10
Fig. 10.01
Fig. 10.02