Basic Safety Instructions; Responsibilities; Notes On Setting Up And Operating The Machine - WDT AVG 0160 Mode D'emploi

AVG 0160
2

Basic Safety Instructions

The Strip and Twist Machine AVG 0160 has been constructed according to state-of-the-art technology
and the acknowledged technical safety regulations.
When carrying out jobs such as installation, putting the machine into operation or setting it up, operation,
changing the conditions of use and the mode of operation or carrying out maintenance and service jobs, it
is important to observe the procedures for switching off the machine described in the operation manual.
RoHS Information:
The Strip and Twist Machine AVG 0160 complies with the EU-Guideline 2002/95/EG (RoHS).
2.1

Responsibilities

The Strip and Twist Machine AVG 0160 may only be operated by suitably trained and authorized
personnel. The user must clearly define and observe the responsibilities of the personnel for operation,
set-up, maintenance and service.
It is particularly important to define who is responsible for work on the electrical equipment. Such work
should only be carried out by specially trained staff.
Should the user make any changes to the machine without consulting the manufacturers or the suppliers,
the latter will not be liable for any damage that may result.
2.2

Notes on Setting up and Operating the Machine

The Strip and Twist Machine AVG 0160 may only be set up and operated in perfect technical condition,
observing all the safety regulations and considering any possible dangers. Before commissioning the
machine, it is always important to check whether all safety devices, especially the safety covers, are
installed and are functioning correctly.
Safety covers may only be removed when the machine is not in operation and has been disconnected
from the electricity supply. The housing and the covers in particular may only be removed by specially
trained personnel.
DANGER!
Touching live parts can cause danger of electrocution with fatal consequences!
If you suspect that the machine cannot be operated safely, it must be switched off and secured against
anyone accidentally switching it on.
The machine may only be used for the purpose specified in the operating manual.
The manufacturers and suppliers will not be liable for any damages which may result due to the machine
being used for a purpose other than that for which it was intended. This is done entirely at the user's own
risk.
Page 25 / 62
Version 05/10