Safety; Designed Use; Predictable Misuse; Responsibilities - WDT AVG 0160 Mode D'emploi

AVG 0160
4

Safety

4.1

Designed Use

- Stripping and twisting inner cable Ø from 0.01 mm² - 6.00 mm² (AWG 24-10)
4.2

Predictable Misuse

Every application which is not mentioned in chapter 4.1 „Designed Use".
-
- Stripping and twisting of other cable Ø
4.3

Responsibilities

The user of the Strip and Twist Machine AVG 0160 is responsible for making sure that all persons
involved in any way, either in the installation or in maintenance of the machine, have been thoroughly
trained on the system using the this instruction manual.
The user is also responsible for the training of operators and the instruction must include the following
aspects:
- Purpose of the machine
- Hazard zones
- Safety rules and regulations
- Functionality of the various components of the machine
- Proper operation of the machine
To assure full familiarization with the system, the training must be conducted in the native language of the
operators involved.
Staff qualifications required in conjunction with the use of the Strip and Twist Machine AVG 0160:
Installation
Set-up
Instruction
Operation
Maintenance
Service
The safety instructions, warnings and precautions contained in the individual chapters must be strictly
observed by all users and operators.
4.4

Hazardous Areas

1. Hazardous Area: Opened Machine
Person at risk:
Type of Hazard:
Technical personnel with language proficiency in either English, German or
French, in
addition to the native language of the operator
Through qualified personnel trained as indicated above
Technical personnel with proficiency in English, German or French
Installation Engineer
Direct or indirect contact with live parts
Hand injuries (cuts from sharp edges)
Hand injuries (bruising during contact with movable parts)
Page 27 / 62
Version 05/10