Connecting To Video Equipment With Rgb Inputs - Sony DXC-C33 Instructions D'utilisation

Connecting to Video Equipment With RGB Inputs

RGB monitor,
image
processor,
etc.
RGB/SYNC input
Computer, image
processor etc.
a) When using a video monitor without a sync signal input connector, the camera
can be set to output a sync signal with the G signal or RGB signals.
For details, see "SYSTEM Menu" on page 26.
b) This setup is for connecting to a composite video (VBS) connector. To output
separated Y/C signals to the S-video input of video equipment, use a CCMC-
9DS camera cable.
For details on switching camera output between VBS (composite video) and Y/
C, see "SYSTEM Menu" on page 26.
36
GB
Connections
R input
G input
B input
a)
Sync input
Composite video
(BNC) or S-video
b)
input (4-pin)
Camera cable:
CCXC-9DD
(D-sub 9-pin
y
D-sub 9-
pin)
Camera cable: CCXC-9DB
y
(D-sub 9-pin BNC
connectors), or CCMC-9DS
y
(D-sub 9-pin BNC, S-
video connectors)
RGB/
or
SYNC
Camera control
unit (rear)
OUT PUT FS/TRIG IN EXT SYNC
VIDEO DV HD
REMOTE
S-VIDEO RGB/SYNC VD/SYNC
Camera
head (rear)
CCMC-20P05/10/30
camera cable
A C I N
CAMERA
(front)
Power cord