Location and
Functions of Parts
and Controls
Camera Head
1 Lens Mount
Attach a C-mount lens or microscope
adaptor.
Note
Be sure to use a lens whose projected part
from the lens mount surface is less than 4.3
mm (3/16 inches). Mounting the lens with
a projected part greater than 4.3 mm (3/16
inches) may damage the internal
mechanism of the camera.
2 Camera cable connector (20-
pin)
Connects to the CAMERA connector on
the camera control unit with the optional
CCMC-20P05/10/30 camera cable.
3 Screw holes
Use these holes (M3, depth: 3 mm (1/8
inches)) to attach the supplied tripod
adaptor to the camera head for mounting
the camera head on a wall, ceiling or
tripod.
Location and Functions of Parts and Controls
11
GB