Operation Through Menus - Sony DXC-C33 Instructions D'utilisation

Operation Through
Menus
To change the settings on the menu, proceed
as follows.
Some of the settings, however, cannot be
adjusted on the menu. Use the controls on
the front of the camera control unit to adjust
them.
For details, see page 17.
Note
Before starting menu operation, make sure
that the LOCK indicator on the front of the
camera control unit is not lit. When it is lit,
the menu will not be displayed even if you
press the MENU button. If the LOCK
indicator lights, press the LOCK button to
turn the indicator off, then operate the menu.
2,3
FREEZE BLACK
SCENE FILE
SELECT
BARS
1
Press the MENU button.
The MAIN menu appears.
<MAIN>
>EXPOSURE
CONTRAST
WHITE BALANCE
ENHANCER
GENERAL
SYSTEM
SCENE FILE
Select
ENTER
16
GB

Operation Through Menus

4 1 2
AE AREA
MENU SELECT
WHITE
ENTER LOCK
LOCK button
and indicator
[A]
Next Exit
MENU
2
Move the cursor to the menu item to
be set by pressing the
then press the ENTER button.
The setting menu is displayed.
<EXPOSURE>
>GAIN
STEP
SHUTTER
Select
MENU
3
Move the cursor to the item to be
adjusted by pressing the
<EXPOSURE>
GAIN
STEP
>SHUTTER
Select
MENU
4
Change the value by pressing the
b button.
Holding down the button changes the
value quickly.
<EXPOSURE>
GAIN
STEP
>SHUTTER
SPEED
Select
MENU
To reset to the initial set value
Select the item to be reset, then press the B
and b buttons simultaneously.
For the initial set value on each item, see
"Menu Configuration" on page 50.
To return to the normal screen
Press the MENU button while the MAIN
menu is displayed.
While each setting menu is displayed, press
the MENU button to return to the MAIN
menu, then press it again to return to the
normal screen.
V or v button,
[A]
STEP
0dB
OFF
Back
V or v button.
[A]
STEP
0dB
OFF
Back
B or
[A]
STEP
0dB
STEP
OFF
Back