Operating the camera with the RM-C950 remote control unit
The functions of the following buttons and controls on the remote control unit
change as follows, in accordance with the functions of the camera.
Buttons/
Button/control
control on
names when
the RM-C950
used with the
camera
PRINT
ENTER
FLASH
FILE SELECT
LONG
AE AREA
EXPOSURE
SELECT
J
LONG
FREEZE
j
EXPOSURE
IRIS
AE LEVEL
2
GAIN
GAIN
J
FUNCTION
BLACK
Note
The FOCUS and ZOOM controls on the RM-C950 do not function for the
camera.
The sheet for the button names when the camera is used with the remote
control unit is supplied with the camera. Attach the name sheet to the control
panel of the RM-C950.
40
GB
Connections
Function
Use when displaying the setting menu selected in the
MAIN menu, or use to set the AE window, etc. manually
in the menus.
Use to switch a preset file between A and B.
Used to switch the AE window set in the menu, AE
AREA1 or AE AREA2, when AGC or CCD-IRIS is
selected.
Used to store an image in a buit-in frame memory.
Pressing the button again outputs an image currently shot.
Used to adjust the auto exposure focusing point when the
camera is set to AGC or CCD-IRIS mode.
When SHUTTER is set to KNOB, this control can be used
to adjust the shutter speed and video gain. Turning the
control counterclockwise adjusts the shutter speed.
Turning it clockwise adjusts the gain level. In KNOB
2
setting, the
GAIN control does not function.
Use to change the variable range of gain levels.
Use to start the auto black balance adjustment.