Problem Solving - Angelcare AC1100 Manuel De L'utilisateur

PROBLEM SOLVING

FALSE ALARMS
• Turn off the Nursery Unit.
• Verify the connection between the Sensor Pad and Nursery Unit. Unplug and reconnect the cord.
• If the crib has a spring or slat base, place a hard board between the crib base and the Sensor Pad measuring at least
13" x 13" (33x33 cm) and 1/4 inch (6 mm) thick.
• Make sure Sensor Pad is positioned as described under the Installation in the Baby's room section. Sensitivity may need
to be adjusted, refer to the Movement section.
ALARM WILL NOT SOUND
• Avoid contact with the crib when the monitor is ON.
• Place crib near a solid supporting wall to avoid Sensor Pad from detecting movement from outside crib.
• You may need to decrease the sensitivity, refer to the section Testing your Angelcare
NO SOUND IS BEING TRANSMITTED
• Bring Parents Unit closer to Nursery Unit.
• Check/replace batteries or recharge Parents Unit.
• Check connections or change to another electrical outlet.
• Ensure both units are ON.
• Check on the top bar of the Parents Unit to see if the Monitor is on "MUTE" instead of "ON". Refer to the Sound Section.
NURSERY UNIT POWER ON INDICATOR (GREEN LIGHT) DOES NOT LIGHT UP
• Check connections or change to another electrical outlet.
• Push and hold the left wing for 2 seconds to turn the Nursery Unit ON.
E
WEAK RECEPTION
N
• Bring units closer together.
• Change the position of one or both units.
• Place units on a flat surface away from baby's reach.
• Replace the batteries or recharge Parents Unit.
STATIC, DISTORTION, INTERFERENCES (FROM OTHER MONITORS, WIRELESS PHONES, WALKIE-TALKIES, ETC...)
• Rotate Parents Unit or move it away from source of interference.
FEEDBACK (LOUD NOISES EMITTED FROM THE PARENTS UNIT)
• Move units farther apart (at least 3 meters/10 feet apart).
• Decrease volume on Parents Unit.
THE PARENTS UNIT SCREEN IS BLACK (PARENTS UNIT IS OFF)
• Turn the Parents Unit back ON by pushing and holding the power key for 2 seconds.
• Replace the batteries or recharge Parents Unit.
If you are not completely satisfied or have any questions, please contact your Distributor.
If you experience a problem that is not noted in this manual,
please do not return the product to the store.
We may have a simple solution to your problem.
72
monitor and the Movement section.
®