Publicité
Les langues disponibles
Les langues disponibles
LSF07 S850
Vibration may be harmful to hands and arms.
Insert tools with a bent shank should not be used.
Use vibration damped tools when available.
Reduce time of exposure to vibration.
Inhalation of oil mist from exhaust may be harm-
ful, use only recommended lubricants.
Dust and fumes generated during operation may
be harmful.
Use spot suction or breathing apparatus.
See also EN 626.
Maintenance
Follow instructions for lubrication, cleaning and
overhaul given in the written instructions supplied
with the machine.
Make sure that service personnel are trained.
Take special care concerning dismantling and as-
sembly of speed governors and overspeed shut off
devices.
Always check the free speed after service.
Use genuine Atlas Copco replacement kits and
parts only.
Warning
Make sure you are familiar with the operating instruc-
tions before you use this machine.
This machine, its attachments and accessories must
only be used for the purpose for which they were
designed:
• This die grinder is intended for mounted wheels
and rotary burrs only.
• Never use grinding wheels attached with an ad-
apter as this machine is not fitted with a wheel
guard.
For product liability and safety reasons any modific-
ation to the machine, its attachments or accessories
must be agreed in advance with an authorized tech-
nical representative of the manufacturer.
EN
© Atlas Copco Industrial Technique AB - 9836 1626 00
Safety and operating instructions
To prevent personal injury and long time risks:
• Familiarize yourself with the enclosed leaflet
"General Safety Instructions for Die Grinders".
• Before making any adjustments to the machine,
e.g. changing an accessory, please ensure that the
air supply is disconnected.
• Check the free speed of the machine at regular
intervals and whenever the machine has been
serviced. This check should be carried out with
the grinding equipment detached.
The maximum permissible speed as marked on
the machine must not be exceeded.
• The grinding equipment must be approved for the
rated speed of the machine.
• When fitting mounted wheels or burrs, reduce the
overhang by pushing the shank all the way into
the collet (Check also with the recommendations
given by the tool manufacturer).
Before starting the machine, check that the collet
is properly tightened.
Warning
Disassembly and assembly precautions
The rotor blades (vanes) in the tool have a PTFE
content. The normal Health and Safety recommend-
ations concerning PTFE must be observed when
handling these rotor blades. Particles from wear of
blades might be found in the machine housing or on
the blades. These particles must not get in contact
with open fire. Wash your hands before smoking as
PTFE-particles heated by the glow can produce
fumes which may give rise to allergic reaction.
General information
EC DECLARATION OF CONFORMITY
We, Atlas Copco Industrial Technique AB, S-105
23 STOCKHOLM SWEDEN declare under our sole
responsibility that our product (with type and serial
number, see front page) and in combination with our
5
Publicité
