stayer SCR 216 W Instructions D'emploi page 24

the vibration emission may differ.
This may significantly increase the exposure leveloverthe
totalworking period.
An estimation of the levelof exposure to vibration should also
take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce theexposure level over the total
working period.
ldentify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories,keepthe hands warm, organisation of work
pattems.
The values givenarevalid for nominalvoltages [U]230/240
V-50/60 Hz - 110/120 V - 60Hz. For lower voltage and models
for specific countries, these values can vary.
WARRANTEE
20.
Warrantee card
You will find the warrantee card among the documents
belonging to the tool. You must fill in the warrantee card
completely and attach a copy of the purchase ticket or
invoice thereto, and give it to your distributor against the
corresponding acknowledgement of receipt.
Observation! Should this card be lacking, immediately
request your distributor to furnish it.
Terms of warrantee
The warrantee will immediately cease to exist when the client's
service of the central offices does not have the warrantee
card within a one-month term as of the date of purchase.
The warrantee will equally cease to exist when the machine
has been used in an inappropriate manner or making use of
accessories being unsuitable for the uses as foreseen by the
manufacturer.
The warrantee is limited solely to manufacturing or
mechanization failures, and it ceases to exist when parts
thereof have been disassembled, manipulated or repaired
out of the manufacturing plant.
STAYER obliges itself to repair or replace the product or the
parts thereof that may be faulty, free of charge only after a
check and at the exclusive criterion of its technicians.
It is considered that all costs for transportation and
disassembling will be borne by the purchaser. So as to
facilitate the technicians' work, please attach a description of
the failures that the client has noticed at the tool during the
use thereof.
DISPOSAL AND RECYCLING
21.
The machine, accessories and packaging should be
sorted for environmental-friendly recycling.
Only for EC countries:
Do not dispose of power tools into household waste!
According the European Guideline 2012/19/UE
for Waste Electrical and Electronic Equipment
and its implementation into national right,power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
correct manner.
Subject to change wlthout notlce.
ENGLISH
24
24