Attachments; Hei-Mix Titramax 100 / 101 / 1000 - Heidolph Hei-MIX Titramax 100 Notice D'instructions

Commissioning
Disconnect the power supply cord
➜
Before disconnecting the mains connection cord, switch off the device.
➜ Disconnect the mains connection cord from the mains socket-outlet.
➜ Disconnect the power supply cord from the IEC appliance inlet on the back of the
device.

Attachments

Use the various optional attachments to fix your laboratory vessels. When mounting the
attachment on the shaking platform of the device, refer to the mounting instructions
delivered with each attachment.
At low shaking frequencies, vessels such as Petri dishes can also be
placed directly on the non-slip contoured rubber mat.
➜
➜

Hei-MIX Titramax 100 / 101 / 1000

➜ Insert multi-well plates into the pockets of the contoured rubber mat supplied.
➜ The multi-well plates are securely fixed in the pockets.
Always place individual vessels in the center of the shaking
platform.
Always distribute several vessels evenly on the shaking
platform.
39