Preliminary Operations; Choice Of The Installation Place - MAXA OTA micro 15 Manuel Utilisateur

OTA micro 15÷50
• Spare parts must correspond to the requirements defined by the MAXA Company.
• In case of dismantling of the unit, follow the relevant antipollution norms.
NOTE. When using the unit, the installer and the user must take into account and place remedy to all the other types
of risks connected with the sistem. As an axample, risks deriving from entry of foreign bodies, or risks deriving from
the conveying of dangerous gases that are inflammable or toxic at high temperature.

3.3 Preliminary operations

• Check out the perfect integrity of all components.
• Check out that in the packing all the accessories for the installation and the relevant documentation, are included.
• Transport the packed section as close as possible to the installation place.
• Do not put tools or weights over the packed unit.

3.4 Choice of the installation place

• Place the unit on a solid structure that shall not causes vibrations and that is solid enough to support the weight of
the machine.
• Do not place the unit in rooms where inflammable gases, acids or aggressive and corrosive substances may be pre-
sent: these could damage the different components in an irreparable way.
• Foresee a minimum free space as shown on the figure, to make possible the carrying of the ordinary and extraordi-
nary maintenance.
Model
15 25
OTA micro
A (mm) 320 320
MINIMUM FREE SPACE
450 mm
FOR CHECKING AND
MAINTENANCE
.
TOP
CEILING
35 50
320 320
22