Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating temperature range
Dry Bulb- / Wet Bulb Temp (° C)
Before commissioning
•
Check that the exhaust hose is properly seated.
EN
•
Notes for cooling and air drying function: When selecting the cooling and air drying functions, allow a
pause of at least 3 minutes to elapse between each switching ON/OFF.
•
Check mains voltage.
Cooling operating mode
•
Press the «Mode» button (6) until the «Cool» symbol lights up.
•
Use the «up» (5) or «down» (4) key to select the desired ambient temperature. (16° C - 31° C)
•
Press the «Air speed» (1) button to adjust the speed of the fan.
Operating mode Air drying
•
Press the «Mode» button (6) until the «Dehum» symbol lights up.
•
Automatic adjustment of the selected temperature to ambient temperature minus 2° C (16° C - 31° C).
•
Automatic setting of the fan to low speed.
Fan
•
Press the «Mode» key (6) until the «Fan» symbol lights up.
•
Press the «Air speed» key (1) and select the speed of the fan.
Timer
•
When the air conditioner is running, press the «Timer» button (8) to select a time between 0-24 h using
the + and - temperature buttons.
•
Your selected time is indicated by slow flashing on the display.
•
Confirm your time setting by pressing the «Timer» button (8) again.
•
The remaining time is now shown on the display.
•
To cancel the function, press the «Timer» button (8) once and the selected time is deleted.
Pivoting (air flow)
•
After switching on the instrument, press the «Oscillation» key (3). The slats then move to the left and
right. After pressing the button again, the function stops and the slats remain in the current position.
Sleep mode
•
In cooling mode, press the «sleep» button (2) and set the temperature. After one hour, the temperature
increases by 1° C and by a maximum of 2° C after 2 hours.
•
Press the «Sleep» button (2) again to end the function.
Water tank
•
Integrated warning function «water tank full» (E3). The water tank integrated in the air conditioner is
equipped with a water level indicator that checks the water level. When the water level reaches a certain
level, the error code «Water tank full» (E3) lights up.
Fahrenheit / Celcius
•
To switch the temperature display between Fahrenheit and Celsius, press the + and - symbols together for two
seconds.
Child lock
•
On the SMART REMOTE KING app, you can lock and unlock the control panel.
Maximum cooling
35/24
58
Minimum cooling
18/12
Publicité
Chapitres
Table des Matières
